 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Vishay Foil Resistors Ultra High Precision Z-Foil Flip Chip Resistor with TCR of 0.05 ppm/C, 35 % Space Saving versus Wraparound Design and PCR of 5 ppm at Rated Power FEATURES * Temperature Coefficient of Resistance (TCR): 0.05 ppm/C typical (0 C to + 60 C) Pb-free Available 0.2 ppm/C typical (- 55 C to + 125 C, + 25 C Ref.) RoHS* * Tolerance: to 0.01 % (100 ppm) COMPLIANT * Power Coefficient "R due to self heating" 5 ppm at Rated Power * Load Life Stability (70 C for 2000 hours): 0.005 % (50 ppm) * Power Rating to: 600 mW at + 70 C * Electrostatic Discharge (ESD) above 25 000 V * Resistance Range: 10 to 150 k (for lower and higher values, please contact us) * Non Inductive, Non Capacitive Design * Short time overload 0.005 % (50 ppm) * Non hot spot design * Rise time: 1ns without ringing * Current Noise: - 40 dB * Voltage Coefficient < 0.1 ppm/V * Non Inductive: < 0.08 H * Terminal Finishes available: Lead (Pb)-free Tin/Lead Alloy * Matched sets are available per request * Any value available within resistance range (e.g. 1K2345) * Prototype samples available from 48 hours. For more information, please contact foil@vishay.com * For better performances please contact us Bottom View Any value at tolerance available within resistance range INTRODUCTION One of the most important parameters influencing stability is the Temperature Coefficient of Resistance (TCR). Although the TCR of Bulk Metal(R) Foil resistors is considered extremely low, this characteristic has been further refined over the years. The VFCP Series utilizes ultra precision Bulk Metal(R) Z-Foil. The Z-Foil technology provides a significant reduction to the resistive element's sensitivity to ambient temperature variations (TCR) and to self heating when power is applied (power coefficient). Along with the inherently low PCR and TCR, Z-Foil technology also provides remarkably improved load life stablility, low noise and availability of tight tolerance. IM PR O VE D The Flip Chip configuration provides a substantial PCB space saving of more than 35 % vs. a surface mount chip with wraparound terminations. The VFCP is available in any value within the specified resistance range. Our Application Engineering Department is available to advise and make recommendations. For non-standard technical requirements and special applications, please contact us. TABLE 1 - TOLERANCE AND TCR VS RESISTANCE VALUE TOLERANCE (%) 0.01 Percent of Rated Power RESISTANCEVALUE () 250 to 150K TYPICAL TCR AND MAX. SPREAD (- 55 C to + 125 C, + 25 C Ref.) 0.2 1.6 100 to < 250 50 to < 100 25 to < 50 10 to < 25 0.02 0.2 1.6 0.05 0.1 0.25 0.2 1.8 0.2 2.8 0.2 2.8 * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 63106 Revision: 28-Jun-07 For any questions, contact: foil@vishay.com www.vishay.com 1 PR O DU CT APPLICATIONS * * * * * * * * * Automatic Test Equipment (ATE) High Precision Instrumentation Laboratory, Industrial and Medical Audio EB Applications (electron beam scanning and recording equipment, electron microscopes) Military and Space Airborne Down Hole instrumentation Communication FIGURE 1 - POWER DERATING CURVE - 55 C 100 75 50 25 0 - 75 + 70 C - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 Ambient Temperature (C) VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Vishay Foil Resistors Ultra High Precision Z-Foil Flip Chip Resistor with TCR of 0.05 ppm/C, 35 % Space Saving versus Wraparound Design and PCR of 5 ppm at Rated Power TABLE 2 - DSCC SPECIFICATIONS (Vishay resistors are listed on the following DSCC specifications) MODEL VFCP1206 DSCC 2009 MIL SPEC MIL-PRF-55342 Note * For VFCP0805, VFCP1506, VFCP2010 and VFCP2512 DSCC Drawings, please contact foil@vishay.com FIGURE 2 -TRIMMING TO VALUES (Conceptual Illustration) Interloop Capacitance Reduction in Series Mutual Inductance Reduction due to Change in Current Direction Note: Foil shown in black, etched spaces in white TABLE 3 - SPECIFICATIONS CHIP SIZE 0805 1206 RATED POWER (mW) at + 70 C 100 mW 250 mW MAXIMUM VOLTAGE RATING ( P x R ) 34 V 86 V RESISTANCE RANGE () 10 to 12K 10 to 30K 10 to 40K MAXIMUM WEIGHT (mg) 5.2 10.3 12 IM PR O VE D 1506 2010 300 mW 400 mW 109 V 200 V 10 to 100K 10 to 150K 25 35 2512 600 mW 220 V TABLE 5 - PERFORMANCES TEST OR CONDITION MIL-PRF-55342 CHARACTERISTIC E R LIMITS 0.1 % Thermal Shock Low Temperature Operation Short Time Overload 0.1 % 0.1 % High Temperature Exposure 0.1 % Resistance to Soldering Heat Moisture Resistance 0.2 % 0.2 % Load Life Stability + 70 C for 2000 hours at Rated Power 0.5 % Note 1. As shown + 0.01 W to allow for measurement errors at low values. www.vishay.com 2 For any questions, contact: foil@vishay.com Document Number: 63106 Revision: 28-Jun-07 PR O DU CT Current Path Before Trimming Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance TABLE 4 - LOAD LIFE STABILITY (+ 70 C FOR 2000 HOURS) CHIP SIZE 0805 1206 1506 2010 2512 MAXIMUM R LIMITS 0.005 % at 50 mW 0.01 % at 100 mW 0.005 % at 150 mW 0.01 % at 250 mW 0.005 % at 150 mW 0.01 % at 300 mW 0.005 % at 200mW 0.01 % at 400 mW 0.005 % at 500 mW 0.01 % at 600 mW TYPICAL R LIMITS 0.005 % (50 ppm) 0.005 % (50 ppm) 0.005 % (50 ppm) 0.01 % (100 ppm) 0.005 % (50 ppm) 0.005 % (50 ppm) 0.005 % (50 ppm) MAXIMUM R LIMITS1) 0.01 % (100 ppm) 0.01 % (100 ppm) 0.01 % (100 ppm) 0.02 % (200 ppm) 0.015 % (150 ppm) 0.02 % (200 ppm) 0.01 % (100 ppm) VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Ultra High Precision Z-Foil Flip Chip Resistor with TCR Vishay Foil Resistors of 0.05 ppm/C, 35 % Space Saving versus Wraparound Design and PCR of 5 ppm at Rated Power TABLE 6 - DIMENSIONS AND LAND PATTERN in inches (millimeters) BOTTOM VIEW (showing terminals for mounting) D Solder Terminals LAND PATTERN W W1 [W - 0.003"] L - 0.005 (0.13) L CHIP SIZE 0805 1206 1506 2010 2512 L 0.005 (0.13) 0.079 (2.01) 0.126 (3.20) 0.150 (3.81) 0.200 (5.08) 0.250 (6.35) W 0.005 (0.13) 0.049 (1.24) 0.062 (1.57) 0.062 (1.57) 0.100 (2.54) 0.126 (3.20) THICKNESS MAXIMUM 0.025 (0.64) 0.025 (0.64) 0.025 (0.64) 0.025 (0.64) 0.025 (0.64) Note 1. Land Pattern Dimensions are per IPC-782 IM PR O VE D FIGURE 3 - CHIP CONFIGURATION High Purity Alumina Substrate Resistive Bulk(R) Metal Foil Solder Protective Coating Document Number: 63106 Revision: 28-Jun-07 For any questions, contact: foil@vishay.com PR O DU CT G X Z D Z1) G1) X1) 0.005 (0.13) 0.010 (0.25) 0.015 (0.38) 0.012 (0.30) 0.020 (0.51) 0.024 (0.61) MAXIMUM MINIMUM MAXIMUM 0.078 (1.98) 0.125 (3.18) 0.150 (3.81) 0.199 (5.05) 0.250 (6.35) 0.053 (1.35) 0.090 (2.29) 0.120 (3.05) 0.153 (3.89) 0.196 (4.98) 0.049 (1.24) 0.062 (1.57) 0.062 (1.57) 0.100 (2.54) 0.126 (3.20) FIGURE 4 - TYPICAL TCR CURVE Z-FOIL (For more details, see Table 1) + 500 + 400 + 300 + 200 + 100 R 0 R (ppm) - 100 - 200 - 300 - 400 - 500 - 55 - 25 0 + 25 + 60 + 75 + 100 + 125 - 0.16 ppm/C 0.05 ppm/C - 0.1 ppm/C 0.1 ppm/C 0.14 ppm/C 0.2 ppm/C Ambient Temperature (C) Note * The TCR values for < 100 are influenced by the termination composition and result in deviation from this curve www.vishay.com 3 VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Vishay Foil Resistors Ultra High Precision Z-Foil Flip Chip Resistor with TCR of 0.05 ppm/C, 35 % Space Saving versus Wraparound Design and PCR of 5 ppm at Rated Power TABLE 7 - GLOBAL PART NUMBER INFORMATION NEW GLOBAL PART NUMBER: Y162910K0000T9W (preferred part number format) DENOTES PRECISION Y VALUE R= K = k AER* 0 = Standard 9 = Lead (Pb)-free 1 - 999 = Custom Y 1 6 2 9 1 0 PRODUCT CODE 1629 = VFCP0805 1630 = VFCP1206 1631 = VFCP1506 1632 = VFCP2010 1633 = VFCP2512 RESISTANCE TOLERANCE T = 0.01 % Q = 0.02 % A = 0.05 % B = 0.10 % C = 0.25 % D = 0.50 % F = 1.00 % FOR EXAMPLE: ABOVE GLOBAL ORDER Y1629 10K0000 T 9 W: TYPE: VFCP0805 VALUE: 10.0 k ABSOLUTE TOLERANCE: 0.01 % TERMINATION: Lead (Pb)-free PACKAGING: Waffle Pack HISTORICAL PART NUMBER: VFCP0805 10K000 TCR0.2 T S W (will continue to be used) VFCP0805 MODEL VFCP0805 VFCP1206 VFCP1506 VFCP2010 VFCP2512 10K000 OHMIC VALUE 10.0 k TCR0.2 TCR Characteristic T IM PR O VE D Note * For non-standard requests, please contact Application Engineering. www.vishay.com 4 For any questions, contact: foil@vishay.com PR O DU CT K 0 0 0 0 T 9 W PACKAGING R = Tape and Reel W = Waffle Pack S W RESISTANCE TOLERANCE T = 0.01 % Q = 0.02 % A = 0.05 % B = 0.10 % C = 0.25 % D = 0.50 % F = 1.00 % TERMINATION PACKAGING S = Lead (Pb)-free B = Tin/Lead T = Tape and Reel W = Waffle Pack Document Number: 63106 Revision: 28-Jun-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of Y163310K0000A0R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |